Several months of testing and several design modifications resulted in the highest quality product. We present a stable and precisely finished wheel stand. A tool used to support work on rims or entire wheels. Thanks to 3 rollers, we can turn the wheel in any direction without any problem. The rollers can be set at an angle, supporting the wheel with a bail or horizontally without the use of a bail. This solution allows you to work on the rims according to your preferences and possibilities.
The stand is made of high-quality, durable 4mm black steel, precisely cut and bent, finally coated with a powder finish, both inside and outside, to provide an additional protective layer against oxidation. Bottom rollers with a length of 300m and a top with a length of 400mm (total length of the bail is 900mm) will match the rims in size from 14 "to 22". High-quality rubber feet keep the stand in one position during all work. Thanks to the special rear bends, the bail is very stable even with massive wheels.
The powder protective layer is resistant to moderate watering, however, if the protective layer is damaged, the steel may corrode. Therefore, we do not recommend filling the stand with heavy water, and after each possible flooding, it should be thoroughly dried
Dimensions:
L 59cm x Wx 37cm x H 92cm
Universal Hangers – Suitable for Foamer, Tornadors & More
Universal hanger for foams, tornadors, brushes, hand sprayers, etc. The distance between the arms (36mm) has been thought out so that it fits all kinds of accessories. For example, we can safely hang a tornado, larger brushes, foamers, manual pressure sprayers and much more. Made of high-quality resistant steel, precisely cut and bent, finally covered with a powder finish, both inside and outside, to provide an additional protective layer against oxidation.
Combining the abrasive powder of small, hard particles and big, soft particles, Glaco Glass Compound Roll-On is able to remove the toughest stains made from oily dirt and fluorine film. By just applying the product lightly onto the glass you will see immediate results as the roll-on removes the oil-film with ease. This convenient product can be used as surface preparation just before applying any coating to the glass.
Directions
1. Remove dust and dirt from glass with water, wipe off any water drops remaining on surface.
2. Shake bottle well with cap on and remove plastic seal.
3. Squeeze handle part of bottle to release compound liquid.
4.Polish onto glass until surface stops repelling liquid.
5. Wait for compound to dry, then wash glass clean with water to make a slurry and wipe off.
6. Remove polishing pad from applicator, then wash and dry for future use.
Maintains a strong coating which resists friction from wipers, dust, car-wash or cleansers, and lasts 6 times longer than conventional coating agents. The water repellency lasts up about 1 year.
Directions
1. Remove dust and dirt from windscreen with water.
2. Use ‘Glaco Roll On Compound’ in advance for surface preparation.
3. Take cap off and apply on dry windscreen.
4. Press side of bottle to allow fluid out and rub firmly onto windscreen without splashing fluid. * Do not apply on wet windscreen as it may cause uneven marks to surface.
5. After drying for 5-10 minutes, wipe off with a dry clean towel.
6. Allow drying for at least 12 hours for coating to bond firmly onto windscreen.
Functional and convenient holder for spray bottles. Despite its small dimensions, the hanger is capable of withstanding a very heavy load. Holes fit most types of atomisers and sprayers.
Features:
- Made of 1.5mm sheet metal - Galvanized layer - Powder coated
The detailing trolley version extended by the middle shelf. Trolley designed for detailing professional and amateur studios. Focus on convenience and functionality. Very practical and made of the highest quality materials will significantly increase the comfort of your everyday work. The right height, innovative solutions and stability guarantee are just a few of its advantages.
Features:
- height of the trolley 80 cm (easy to slide, do not bend down) - 3 shelves with dimensions of 40x50cm and walls with a height of 10.5 cm - 4 places / cavities for polishing machines - 5 holes for brushes - 2 bottles for bottles with coatings (43mm diameter fits bottles up to 100 ml) - 2 places for mounting bottles. The absence of an inner edge allows you to avoid unrolled pressure on the atomizer when you pull the bottle - 4 swivel castors (50mm) made of high quality rubber material, guaranteeing stability even on uneven surfaces - 3 horizontal panels for stabilizing machines and hanging microfibers and bottles. The front panel is higher allowing you to create or stick an individual logo - The "1" and "2" numbers are used to classify microfibres in activities requiring initial and final actions - seals securing the place of machine Hanning - made of 1.5 mm galvanized sheet metal - powder coated and internally protected
High quality, ergonomic and neat brush holder. It has space for 6 brushes. Designed for the effective use of space at work. Made of 1.5mm galvanised metal. The narrow arms of the handle match most of the holes in the brush handles. The distance between the arm and the wall is 5cm. Finally it is coated with a powder finish, both inside and outside, to provide an additional protective layer against oxidation. As in all our products there are no sharp corners which make it safety in use.
It can be mounted on Poka Premium detailing trolley with modulate legs, (multi hole legs), as an additional hanger.
Features:
- Made of 1.5 mm galvanised sheet metal - Powder coated - Place for 6 brushes
Dimensions:
L 49.5cm x H 3.5cm x W 5cm
Images are for illustration purposes only and DO NOT include the trolly or brushes
Functional and convenient holder for bottles and atomizers. Despite its small dimensions, the hanger is capable of withstanding a very heavy load. Holes fit most types of atomizers and sprayers.
Features:
- Made of 1.5mm sheet metal - Galvanized layer - Powder painted
Functional and comfortable brush holder. The upper openings are suitable for most brush sizes the lower channels are suitable for most types of atomizers and sprayers. The solid structure will hold up over 10 kg of load without lifting. Front panel laser cut inscription - EMPTY
Features:
- Made of 1.5mm sheet metal - Galvanized layer - Powder coated - 5 x 20 mm holes - 2 x 15 mm holes - Laser cut inscription - EMPTY
High quality trays for storing and sorting of detailing accessories. The depth of the shelf is 86 mm which allows to store even large dimensions of accessories such as polishing pastes. Robust steel and powder finish guarantee excellent appearance and durability of the material.
High quality trays for storing and sorting of detailing accessories. The depth of the shelf is 86 mm which allows to store even large dimensions of accessories such as polishing pastes. Robust steel and powder finish guarantee excellent appearance and durability of the material.
High quality hanger for 2 to 4 polishing machines with convenient cable storage. Made of solid steel suitable for DA and rotary type machines with support plates from 30 - 180 mm. Sided excision is made for small polishing machines or other small components.
Features:
- Made of 1.5mm sheet metal - Galvanized layer - Powder coated - Easily adapt to a variety of Dual Action, rotary and pneumatic machines - Keeps up to 4 polishing machines - Additional cable storage
Protective or masking tape shelf storage. Designed indentation on the sides helps hold up the tapes. The shelf will accommodate all the tape sizes available on the market.
Features:
- Made of 1.5mm sheet metal - Galvanized - Powder coated
Shelf will hold pads with a diameter of 83mm to 165mm. Mounting elements placed in the upper and lower part of the feeder guarantee stability during the use of the feeder. The feeder will hold about 14 polishing pads.
Features:
- Holds about 14 polishing pads with diameter of 83mm to 165mm - Made of 1.5mm sheet metal - Galvanized - Powder coated
A convenient and functional feeder for storing small polishing pads. A specially designed gutter at the bottom of the feeder allows for convenient removal of pads. The inner surface with a diameter of 17 cm will accommodate pads with a diameter of 165mm. Mounting elements placed in the upper and lower part of the feeder guarantee stability during the use of the feeder. The wide space between the walls of the feeder allows you to take out pads from anywhere. The feeder will hold about 15 polishing pads.
Features:
- Made of 1.5mm sheet metal - Galvanized layer - Powder coated - Fits 165mm pads
Shelf for storing and organising leather and upholstery care products in one place.
Features
- 20cm tray storage for free standing bottles - 15cm shelf to store up to 3 leather and upholstery brush - 15cm gutter for brush or spray bottles storage - Galvanized - Powder coated
Functional and comfortable brush holder. The upper openings are suitable for most brush sizes the lower channels are suitable for most types of atomizers and sprayers. The solid structure will hold up over 10 kg of load without lifting. Front panel laser cut inscription - BODY
Features:
- Made of 1.5mm sheet metal - Galvanized layer - Powder coated - 5 x 20 mm holes - 2 x 15 mm holes - Laser cut inscription - BODY
Fusso Coat 12 Months Wax is a synthetic paint sealant that creates a protective hydrophobic coat on the car's body. It leaves a very smooth and glossy finish. What is by far the most important is the durability! Up to 12 months of beading and sheeting is the reason why Fusso Coat is taking the detailing world by storm. Available in two tone variations to produce best results depending on your vehicle’s paint colour.
✔️ Weather Resistant – Protects the surface of your vehicle from oxidation, discolouration, UV light, acid rain and water
✔️ Anti-Fouling – Does not adhere stain, easy to wash off by just rinsing off dirt, salt, bird droppings, traffic grime and etc
✔️ Strong Water Repellency – Super hydrophobic coating allowing water to sheet off easily
✔️ Gloss – Creates a thick clear, transparent, deep gloss and shine layer on your vehicles surface
✔️ Coats up to 40 vehicles!
Directions
* Make sure that your car colour is compatible with product.
1. Wash and decontaminate car surface.
2. Dampen included applicator with water and take a very thin amount of wax onto the included applicator sponge, spread it thinly and evenly onto car surface.
3. After surface gets dry (2-3 min), wipe off with a dry soft clean towel for finish.
* We recommend you do this process panel by panel (e.g. hood, door, roof, etc.) especially in the summer.
*For best results we recommend buffing off with SOFT99 ‘Wipe Cloth’ and do not wash the car in next 24 hours to allow polymerisation.
High quality trays for storing and sorting of detailing accessories. The depth of the shelf is 86 mm which allows to store even large dimensions of accessories such as polishing pastes. Robust steel and powder finish guarantee excellent appearance and durability of the material.
High quality trays for storing and sorting of detailing accessories. The depth of the shelf is 86 mm which allows to store even large dimensions of accessories such as polishing pastes. Robust steel and powder finish guarantee excellent appearance and durability of the material.
Hanger for car keys in shape of polishing machine with additional shelf. A convenient and aesthetically pleasing place for car keys. You may also want to consider an attractive clothes hanger.
Features:
- made of 1.5 mm galvanized sheet metal - powder coated and internally protected - 4 hangers and a shelf for keys
Functional and comfortable brush holder. The upper openings are suitable for most brush sizes the lower channels are suitable for most types of atomizers and sprayers. The solid structure will hold up over 10 kg of load without lifting. Front panel laser cut inscription - WHEELS
Features:
- Made of 1.5mm sheet metal - Galvanized layer - Powder coated - 5 x 20 mm holes - 2 x 15 mm holes - Laser cut inscription - WHEELS
Designed to hang one Nano polishing machines with cable holder. Can also fit most size DA and rotary types machines available on market.
Features:
- Designed for Nano Machines and will fit most size DA's & Rotary type machine. - Can be mounted onto our Detailing Trolley - Galvanized - Powder coated
Dimensions:
L 11cm x W 7cm x H 19cm
*The detailing trolley is not part of the hanger's offer
